1/10/2023 0 Comments Rage 2 blade![]() During this period, I harvest over ten deer with the use of these heads. ![]() I continued to use Standard Rage Two-Blade Broadheads for more than ten years. The particular deer that was shot traveled no more than 40 yards before expiring, leaving an unimaginable blood trail. The wound channel left by the Rage was nothing short of devastating. Upon shooting my first deer with the Standard Rage Two-Blade, I was blown away. This was quite the departure from fixed blade heads that I had used in the past, many of which flew rather erratically. I found these heads to be extremely accurate, as they flew identically to my field tips. I became an instant fan of the Standard Rage Two-Blade Broadhead. However, I had remained skeptical toward the reliability of most mechanicals of the era. Prior to making the switch to Rage, I had always used a fixed blade broadhead, though I had considered taking up the use of a mechanical head. ![]() I first began using the Standard Rage Two-Blade Broadhead immediately following its 2006 release. In its standard form, the Rage broadhead is tipped with a sharpened bleeder blade, affixed by a small set screw. Prior to deployment, these blades are held in place by a specialty collar, on which the blade’s shoulders are seated. The Standard Rage Broadhead uses specialty blades with inlaid tracks, which allow them to slide about on a fixed roll pin that is centrally located within the broadhead’s body. This technology allows the Rage Broadhead’s blades to slide rearward into the fully deployed position, rather than pivoting open, as is the case with most mechanical heads. Upon its release, the Standard Rage Broadhead was often heralded as a technical breakthrough, due to its use of the company’s proprietary Slip-Cam Technology. Josh Boyd Hands-On Review Standard Rage Broadhead The following is a detailed account of my experiences with each. Over the past 15-years, I have used three different models of Rage Broadheads, including the Standard 2-Blade, Chisel-Tip, and Hypodermic. Each of these sub-models carries their own distinct features and attributes. Since this time, the company has introduced several variants of their standard broadhead, including the Chisel-Tip and Hypodermic models. How They Stack UpįeraDyne Outdoors first introduced the Rage Broadhead in 2006, at which time only a standard 2-blade and 3-blade model were available. Of these brands, I have had the most significant amount of experience with Rage Broadheads. While I certainly cannot speak as to the capabilities of every broadhead on the market, there are several particular brands that I am quite familiar with. Hands-On Review Rage Hypodermic Broadhead.Hands-On Review Chisel-Tip Rage Broadhead. ![]() Hands-On Review Standard Rage Broadhead. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |